1. For paper tube diameter Ø30-200mm; paper tube thickness of 1-15mm paper tube production.
2. According to different paper tube, tube speed between 0-25 (m / min).
3. No resistance four machine so that the paper tube strength has been greatly improved.
4. Paper tube fixed-length mode for light control fixed length, this mode of operation is simple and easy to operate, suitable for novice operation.
5. The main motor is Shanghai Strong \ Hengshui Yongshun (15kw), the output power of this product is strong, and has adjustable speed function.
6. Reducer WPO155 reducer, the reducer running smoothly, low noise.
7. By adjusting the foot of the bottom of the console to achieve the level of stability of the machine.
8. The host two adjustable arm below the three spherical support columns, thereby increasing the stability of the swing arm, reducing the lower bearing single-sided bearing force, thereby enhancing the service life of parts.
9. Cutting table motor for Shanghai Oute gear motor, replacing the traditional cycloid motor. This product has low noise, strong power and low failure rate.
10. The synchronization of cutting table for the mechanical pneumatic type, according to the diameter and thickness of the paper tube cutting machine adjustable weight device, the return of the cutting table by the pneumatic to complete.
11. Cutter lift by pneumatic to complete; knife speed by adjusting the cylinder shut-off valve to control. This adjustment is extremely easy.
12. Inverter for the An Rui Ji products, this product is well-known brands, high practical value, low failure rate, the repair rate is small. By frequency control motor to achieve the machine speed adjustment.
13. Control System PLC dimensional control products, the system response quickly, accurate data processing, good stability, anti-interference ability.
14. The man-machine interface is Kunlun products, through the man-machine interface adjustment cutter, time and other data, more user-friendly than the traditional operation panel.
15. The operation of two mainframe design features more user-friendly, the operator in the paper orientation and the direction of machine operation can easily control the machine's speed, this feature in the machine during the production of paper can be timely deceleration or downtime and reduce waste.
16. The host belt roller diameter of 294mm, instead of the traditional small-diameter belt roller, which greatly increase the belt roller and belt friction, thus avoiding the belt slip. Discard phenomenon, thereby increasing the quality of paper tube production, the protection of the belt roller Cover to improve the production of safe operating factor, this device is more secure, user-friendly.
17. The mainframe of the mold fixed sleeve adjustable, A. For different diameter mold, the belt can be arbitrarily determine the position of the abrasive, to avoid over-strained belt to strain. Second, the use of the mold for a long time caused by wear and tear, can be adjusted by changing the position of the mold sleeve, the mold longer. The six fixed bolts at the bottom of the machine head can adjust the parallelism of the mold to make the paper tube produce smoother and smoother.
18. The bottom of the host rack after the human design of a toolbox to facilitate the host operator tools and emergency items stored.
19. The main electrical components of the implementation of CHINT products; cylinder components for the day Austrian products. These are well-known domestic brands, with durable, practical and higher value characteristics.
20. Cutting table trolley walking by linear bearings and optical axis to complete the rod instead of the dangling device is the operation of the machine more stability.
21. Into the paper cloth holder device for the triangular fixed-type, replacing the traditional single column. This device greatly enhances the stability and smoothness of the feed.
22. Host table stainless steel plate, effectively prevent the bump on its external force and oil, glue on the surface of its corrosive.
Machine specification :
| Technical parameter | |
| Roll tube paper layer | 3-25 (layers) |
| Paper tube diameter | 30-200 (mm) |
| Paper tube thickness | 1-15 (mm) |
| Tube speed | 0-25 (m / min) |
| Fixed-length mode | Light Control (Infrared) |
| Winding machine head | Four machine head |
| Cutting method | Single round knife cutting |
| Core mold fixed way | Flange plus tight |
| Glue way | Double-sided adhesive |
| control method | Frequency |
| Input voltage | 380V / 220V |
| Number of operators | 1-3 people |
客服1